SCRUBBER

Product Details:

Laxsun Envirotech pvt. Ltd.  Is design & manufacturing of Wet scrubber systems are ideal for the efficient removal of inorganic gases, odors, and fumes. They are well-suited as primary or secondary systems in conjunction with thermal oxidizers, and are used in a series where there are multiple-contaminant gas streams. The removal process is achieved by bringing the gas stream into contact with the scrubbing liquid, which facilitates mass transfer of the contaminants into the liquid. When the water is recirculated, addition of fresh water is necessary to purge contaminants and replace evaporation losses. Fresh water may be added to the recycle continuously or periodically.Wet scrubbers are suitable for chemical processes, metal finishing, semiconductor manufacturing and other industrial operations generating fumes and gases. ng and low pressure drop. Removal efficiency of scrubber: inlet vs. outlet requirement, based on mass emission in lbs/hr. in vs. lbs./hr. out. It design to ppfrp/ ppfrv construction SS-304 construction/ SS-316 construction.

Additional Information:

• Production Capacity: 5
• Delivery Time: 15 DAYS
• Packaging Details: WOOODEN PACKING

Product Details:

Laxsun Envirotech pvt. Ltd.  Is design & manufacturing of Packed bed wet scrubber systems are ideal for the efficient removal of inorganic gases, odors, and fumes. They are well-suited as primary or secondary systems in conjunction with thermal oxidizers, and are used in a series where there are multiple-contaminant gas streams. Packed tower scrubbers are suitable for chemical processes, metal finishing, semiconductor manufacturing and other industrial operations generating fumes and gases. ng and low pressure drop. Removal efficiency of scrubber: inlet vs. outlet requirement, based on mass emission in lbs/hr. in vs. lbs./hr. out. It design to ppfrp/ ppfrv construction.

Additional Information:

• Delivery Time: 5
• Packaging Details: WOODEN PACKING

Product Details:

Laxsun Envirotech pvt. ltd is engaged Fume Scrubbers are designed to control acidic fume, toxic gases, toxic fumes from the various process. The scrubber units can be manufactured in mild steel with various linings such as FRP, Rubber Lining, Zinc coating etc. Scrubbers can also be supplied in stainless steel, complete FRP and PP. complete turnkey jobs are also undertakes by us.

Additional Information:

• Production Capacity: 5
• Delivery Time: 15
• Packaging Details: WOODEN PACKING

Product Details:

Laxsun Envirotech pvt. Ltd.  Is engaged to design  venturi scrubber consists of a converging section, a throat (the narrowest part of the venture tube) and a diffuser. The dust/gas mix flows through the venturi tube and reaches top speed in the throat section. Thereafter, the mixture passes into the diffuser where the speed drops again. Liquid is added to the gas flow either in the throat section or prior to it. Intensive mixing takes place between the gas and the liquid in the throat section of the venture tube. Due to the high speed realised by the gas and liquid, water is released in fine water droplets.

Venturi scrubbers can be used to remove small particles (< 1 µm) from a gas stream. However, they can also be used for larger particles, though energy use is relatively high in such cases. Even at very high pressure drops, some types of dust cannot be separated. In some venturis it is possible to vary the width of the throat section, thus allowing the separator to be adjusted for varying flow volumes – thus retaining a high yiel. It design in MS construction/ SS-304/ SS-316 construction/ FRP construction.

Additional Information:

• Production Capacity: 5
• Delivery Time: 15 DAYS
• Packaging Details: LOOSE PACKING/ WOODEN PACKING